eAMP 2 Product Manual
Chapter 1 – Introduction
What is eAMP 2？
The eAMP 2 is a full-featured network streaming stereo amplifier that utilizes Class-D amplification technology and outputs a power 65W/8Ω per channel to directly drive your passive speakers. In addition, it has 2 analog and optical digital inputs for streaming audio from other sources to other speakers, as well as features such as subwoofer output, 12V trigger interface, and RS232 interface. Moreover, it supports a do-not-disturb mode and EQ setting function to offer an excellent auditory experience for various applications, such as background music systems, providing you with endless listening pleasures.
Feature
-
- 65Wx2 /8Ω
- IEAST MRM
- Dynamic sampling rate , supporting 48kHz/24bit decoding and output
- Spotify Connect/Tidal Connect
- Airplay 2/DLNA/RS232/TCP/IR/Siri control
- 12V trigger in
- Unique one-line function – 0ms TV sounds delay
- Non-disturb mode with one button
- Rack Install -2 unit make up standard 1U rack design
Rich interfaces and extensions
This passage contains a variety of interfaces, including 2×65 watt speaker outputs, 1 analog stereo output and 1 subwoofer output. It also supports multiple input interfaces, including 2 analog inputs and 1 digital optical input. In addition, this product includes intelligent control interfaces, including RS232, Ethernet and 12V trigger input. Furthermore, provides powerful streaming capabilities through expansion interfaces.
Installing eAMP 2
Get ready
Scan QR code Download the iEAST APP
Know the device
Connections
The eAMP 2 remote control and front panel Function buttons let you easily control the music
Front panel Function buttons
Infrared remote control for eAMP 2
Restore factory settings
Method 1: Use the front panel buttons
Step 1: Short press the “Mode&STANDBY” button to switch to “LINE IN” mode
Step 2: Long press the “PLAY/PAUSE&SETING” button for 3 seconds to enter the factory reset mode
The following schematic diagram:
Method 2: Using an infrared remote control
Step 1: Short press the “
” button on the remote control to switch to “Line In” mode
Step 2: Long press the “
” button on the remote control for 3 seconds to enter factory reset mode
Method 3: Using the IEAST control app
Step 1: Enter “Device” and click “
” to enter the device
Step 2: Select “Device Info““
Step 3: Select “Restore Factory Settings““
Step 4: Pop up a prompt box, select “Confirm“, and enter the factory reset mode
Chapter 3: Technical Specifications
